TMAR-KC TYPE2 Series

Tajima’s flagship embroidery machine

Description

The TMAR series has a reputation for embroidering finished products. This is the Tajima Group’s self-confidence product that pursues ease of use, embroidery quality and production efficiency.

Digitally Controlled Presser Foot

The DCP can reduce fabric fluttering that occurs during embroidery.
It is especially effective when working thick fabric, very thin fabric, and folds of material.
“Fluttering” occurs when the material is lifted up during embroidery which causes skipped stitches, miss-trimming, and reduced quality stitching.

Direct Command switches

Various operation switches and multi-color LEDs are located on the each tension base. Since all of the main functions of the operation panel can be manipulated in front of each head, the working efficiency of operators has been improved. Commonly used functions may be assigned to the custom switches.

Slim Cylinder Bed, Reinforced Wide Cap Frame

The downsized Slim Cylinder Bed has widened the
application range so as to cover tubular products,
such as sleeves and pockets.

The reinforced Wide Cap Frame has enhanced the
embroidery stability whereby increasing the rotational
speed to 1000rpm.

 

Snap-fit type middle thread guide

Touch Screen Operation Panel

 

Model Needles Multicolor heads Head interval Embroidery space
(D×W)
K0902C 9 2 500 450×500 2,260 1,355 1,730
K1202C 12 2 500 450×500 2,260 1,355 1,730
K1502C 15 2 500 450×500 2,260 1,355 1,730
K0904C 9 4 360 450×360 2,560 1,355 1,730
K1204C 12 4 360 450×360 2,560 1,355 1,730
K1504C 15 4 360 450×360 2,560 1,355 1,730
K0904C 9 4 500 450×500 3,260 1,355 1,740
K1204C 12 4 500 450×500 3,260 1,355 1,740
K1504C 15 4 500 450×500 3,260 1,355 1,740
K0906C 9 6 360 450×360 3,280 1,355 1,740
K1206C 12 6 360 450×360 3,280 1,355 1,740
K1506C 15 6 360 450×360 3,280 1,355 1,740
K0906C 9 6 500 450×500 4,260 1,355 1,740
K1206C 12 6 500 450×500 4,260 1,355 1,740
K1506C 15 6 500 450×500 4,260 1,355 1,740
K0908C 9 8 360 450×360 4,000 1,355 1,740
K1208C 12 8 360 450×360 4,000 1,355 1,740
K1508C 15 8 360 450×360 4,000 1,355 1,740
K0908C 9 8 500 450×500 5,260 1,355 1,740
K1208C 12 8 500 450×500 5,260 1,355 1,740
K1508C 15 8 500 450×500 5,260 1,355 1,740

 

  • Revolution:Max.1,100rpm
  • Power consumption:470W(910VA)
  • Power supply:3-phase 200V / Single-phase 100,200V

Factory Options:

  • Seeds Beads Device
  • Sequin Device IV
  • Position Marker
  • Lochrose Embroidery Device
  • LED Light
  • Beam Sensor
  • EMB. Lame Attachment
  • Under Thread Winder

Frame Options:

  • Cap Frame 2  (75mm×360mm)
  • Border Frame (550mm×600mm
  • Pocket Frame  (100mm×75mm, 65mm×100mm)

Reviews

There are no reviews yet.

Be the first to review “TMAR-KC TYPE2 Series”

Your email address will not be published.